How can Lono be configured to work with a Master Valve or Pump Relay?

In short, you can plug your Master Valve or Pump Relay wire into any of Lono's zone terminals. During onboarding after your zones have been recognized, you'll be able to explicitly note which zone terminal has the Master Valve or Pump Relay wire plugged into it.

Now that you've plugged your Master Valve or Pump Relay wire into one of Lono's zone terminals, now you'll be able to configure it through the app by taking the following steps:

  1. Create an account
  2. Allow "Lono" to access your location while you use the app
  3. Connect Lono to your WiFi network and pair with Bluetooth
  4. On the proceeding "Set up Zones" screen, where Lono automatically detects which zones you have wired in, you can select if your irrigation system requires a Master Valve or Pump Relay, and then select which one:

Have more questions? Submit a request

Comments

Powered by Zendesk